Skip to product information
1 of 4

2002-2007 TOYOTA ALPHARD POWER SLIDING DOOR CABLE OEM TOYOTA PART

2002-2007 TOYOTA ALPHARD POWER SLIDING DOOR CABLE OEM TOYOTA PART

Regular price $275.00 CAD
Regular price Sale price $275.00 CAD
Sale Sold out

OEM Toyota Power Sliding Door Cable for 2002–2007 Toyota Alphard (First Generation)

Having problems with your first-generation Toyota Alphard power sliding door? If your sliding door is moving slower than usual, getting stuck halfway, making unusual noises, or repeatedly beeping during operation, a deteriorating power sliding door cable could be the cause.

The 2002–2007 Toyota Alphard uses a metal cable with a protective rubberized coating that runs along the bottom edge of the rear-most side window. This cable connects to the power sliding door motor and spool mechanism, allowing the door to open and close electrically.

Over time, the original rubberized cable coating can dry out, crack, and deteriorate. As the cable breaks down, damaged sections can become tangled or wind incorrectly into the motor spool, causing the mechanism to jam. This is a common failure on first-generation Toyota Alphard models.

This genuine OEM Toyota replacement cable assembly is designed to replace the deteriorated cable and restore proper operation of your power sliding door.

OEM Toyota Part – In-stock in Canada, ready to ship or pick up in Vancouver, BC.

Compatible Models (VIN)

For first-generation 2002–2007 Toyota Alphard models:

ANH10 — 2.4L Gasoline FWD

ANH15 — 2.4L Gasoline AWD

MNH10 — 3.0L V6 FWD

MNH15 — 3.0L V6 AWD

ATH10 — 2.4L Hybrid E-Four

Compatible with the first-generation Alphard power sliding door cable mechanism. Select the correct left or right sliding door when ordering.

Available Variants

Choose the replacement configuration that matches your repair requirements:

1. Left Sliding Door Cable

OEM replacement cable for the left power sliding door.

Available with or without the motor preinstalled.

2. Right Sliding Door Cable

OEM replacement cable for the right power sliding door.

Available with or without the motor preinstalled.

3. Cable Only – Reuse Your Original Motor

Includes the replacement OEM cable assembly.

Requires removal and disassembly of your existing power sliding door motor.

Remove the old cable and install the replacement using the supplied screws and zip ties.

Reassemble and reinstall your original motor.

4. Cable with Motor Preinstalled (+$50)

Replacement cable supplied with the motor assembly already installed.

No motor disassembly, cable removal, cleaning, or reassembly required.

Remove your old motor assembly and install the replacement unit.

A simpler option for customers who want to avoid rebuilding the original motor assembly.

Common Toyota Alphard Power Sliding Door Problems

A failing power sliding door cable can cause several symptoms, including:

Slow power sliding door operation: The door takes noticeably longer than normal to open or close.

Door gets stuck halfway: The sliding door struggles to move or stops during electrical operation.

Repeated beeping: The power door beeps during activation and may stop operating.

Power door motor jamming: Deteriorated cable coating becomes tangled inside the motor spool.

Unusual noises: Grinding, clicking, or straining sounds coming from the sliding door mechanism.

Door works manually but not electrically: The mechanical sliding mechanism may still function, while the powered cable and motor assembly are faulty.

If your Alphard is experiencing these symptoms, inspect the power sliding door cable and motor spool for deteriorated rubber coating, fraying, or tangled cable.

Why Does the Original Power Door Cable Fail?

The factory Toyota cable uses a metal inner cable covered by a rubberized protective coating. After years of use, temperature changes, moisture, and general aging can cause this coating to harden and crack.

As the rubber coating deteriorates, pieces can separate from the cable and wind back into the motor spool. This can prevent the cable from feeding correctly, eventually jamming the power sliding door mechanism and forcing it to snap the cable or break the plastic spool housing.

Replacing the deteriorated cable helps restore smooth cable movement and allows the original power door motor mechanism to operate correctly again, provided the remaining motor and door components are in good working condition.

Product Features

Genuine OEM Toyota replacement power sliding door cable

Designed for 2002–2007 first-generation Toyota Alphard models

Available for left or right sliding doors

Choose cable-only or complete cable assembly with motor preinstalled

Helps resolve common power sliding door cable jamming issues

Replacement for snapped, cracked, deteriorated, or tangled factory cables

Supplied with installation hardware for cable-only installation

Retains the factory power sliding door system

Important Installation Information

Cable-only option: Your original sliding door motor must be removed from the vehicle and disassembled. The old cable is removed and the new cable assembly is installed using the supplied screws and zip ties. The motor must then be reassembled before installation.

Cable with motor option: The replacement cable comes preinstalled with the motor assembly. Simply remove the original assembly and install the replacement, avoiding the additional work of disassembling and rebuilding your original motor.

Please select the correct left or right sliding door and whether you require the cable-only or motor-preinstalled option before checkout.

Why Choose JDMAutoParts.ca?

We specialize in replacement parts for Japanese Domestic Market (JDM) vehicles imported from Japan. Our inventory is stocked locally in Vancouver, BC, with Canada-wide shipping available.

Shipping & Pickup

North America-wide shipping available

Local pickup in Vancouver, BC

Fitment Note: This listing is specifically for first-generation 2002–2007 Toyota Alphard power sliding door cable assemblies. If you're unsure which side you need, contact us with your full VIN or a photo of the affected sliding door before ordering.

SEO Keywords: LEFT CONTROL SLIDE DR AT 69641-58010, RIGHT CONTROL SLIDE DR AT 69631-58010 Toyota Alphard power sliding door cable, Toyota Alphard sliding door cable replacement, 2002–2007 Toyota Alphard door cable, first generation Alphard power door repair, Toyota Alphard power door not working, Toyota Alphard sliding door stuck, Toyota Alphard sliding door beeping, Toyota Alphard power door moves slowly, Toyota Alphard door motor cable, Toyota Alphard left sliding door cable, Toyota Alphard right sliding door cable, ANH10 sliding door cable, ANH15 sliding door cable, MNH10 sliding door cable, MNH15 sliding door cable, ATH10 sliding door cable, OEM Toyota sliding door cable, JDM Toyota Alphard parts Canada
View full details